Cycle

Element-deflecting carbon finish. Dual zipper for easy access 5.9 cm high, 0.43 Litre capacity

• Same great features of the SUPER WING, mounting specifically to Selle SMP T-Series seat rails.
• Get a perfect position for you with 3 carrier positions and 4 cage angle positions.
• Tuck your repair out of the wind, in the integrated storage compartment for free speed!
• Mount 2 bottles on the side or 1 at the rear for flexibility. No need to purchase multiple carriers.
• Sturdy aerospace aluminium material makes the SUPER WING the toughest carrier on the market!
• The SUPER WING SMP T-SERIES is not recommend for use on gravel or mountain bikes.

FEATURES

Introduction

Our Hydration and Repair carriers have often been copied, but like any copy, it is never as good as the original. With over a decade of experience designing these carriers and winning more Ironman Distance World Championships than all our competitors combined, we have launched the first of the next generation of Alloy XLAB Hydration Carriers. This new 'wing' will be on winning race rockets for the next several years.

Rear carriers should not interfere with the air on the rider's back, but instead fill in the turbulence 'hole' behind the riders posterior, thereby reducing the rider's drag (which accounts for 64% of energy used on a racing bicycle). We positioned the carrier in the Wind Tunnel to 'draft' behind the rider causing no extra drag.

Storage

We wanted the next generation of carriers to solve the problem of storing keys, cell phones, cash, tire levers, and other essential items. These and other items can be stored in the XLAB MINI BAG which drops vertically and easily into the integrated compartment and is secured by the top XSW-STRAP.

Tires and tubes are always an issue, so now you can attach them neatly under the SUPER WING SMP T SERIES inside the XLAB MEZZO BAG.

Hydration

With the SUPER WING SMP T SERIES you can use a single AQUA-SHOT bottle cage on the rear or one on each side. XLAB recommends using either the GORILLA CAGE or the GORILLA XT CAGE for rear carriers.

Adjustable Mounting

One of the key features invented by XLAB is the multiple mounting holes for the saddle rail clamps. One position sets the bottle cages close to vertical and others incline the cages for rider preference. Because of it's past success, we have kept the same feature in the XLAB SUPER WING SMP T-SERIES for customizing the installation.

In addition, there are 4 sets of holes for the lower cage bolts which with the front holes provides a total of 12 different cage angle positions.

Lightweight

We use the latest aerospace aluminium alloy to provide the toughest alloy carrier on the market with no twisting like other hydration carriers. Without hardware the XLAB SUPER WING SMP T-SERIES weighs only 85 grams.

Bottom Line

The bottom line—simply the most versatile Alloy Hydration and Repair system carrier, complete with mounting hardware. XLAB makes you faster – ask the Pros!

SPECIFICATION

Includes

• SUPER WING SMP T-SERIES chassis
• One Pair XSW-Straps
• All hardware and instructions

Material

6061 T-6 Aluminium

Weight

Aluminium 93 grams, Hardware 53 grams. Total 146 grams

Warranty

3 YEAR WARRANTY
Because of our engineering and testing for this product we give it a 3 Year LIMITED Warranty to the original owner.

Experience the ultimate fusion of functionality and comfort with our Womens Technical Merino 150 Long Sleeve. Crafted meticulously in Denmark by Herning Fabrics, this top combines 23% mulesing-free merino wool on the exterior with 77% polyester inside, ensuring the perfect balance of temperature regulation and durability. Enjoy the natural moisture management and self-cleaning properties of merino wool paired with the quick-drying and resilient characteristics of polyester.

This hybrid fabric guarantees shape retention and improved abrasion resistance, making it ideal for multifunctional use. Whether you`re navigating the outdoors or relaxing at home, our shirt provides 24/7 comfort and is machine washable for easy care.

Also available in Short Sleeve Version.

Details and Materials

23% mulesing-free merino wool (exterior) and 77% polyester (inside)

Suitable for all-day wear, from active workouts to casual outings
Proudly crafted in Denmark, Made in Fusion`s own factory in the EU, Stocked in the UK
Machine washable

Available in Black, Night Blue, Rust and Sand.

For those with limited space and on a budget. Side access available in both left and right hand access. It is small but mighty at 6 lbs grip force!

• Microfleece Bag
  Protects contents and reduces rattle noise.
• Waterproof
  Keeps contents clean and dry.
• Versatile Mounting
  Fits all XLAB cages.
• Multi-storage Carrier
  Fits tubular tire and pit stop or tube, levers, CO₂ inflator and multi-tool.
• Anti-launch Design
  Matches XLAB cage groove to prevent launching.

Technology

• Extra wide screw cap.
• Durable high density poly propylene material.

Medium pod that fits in a cage. Includes fleece bag. Holds tubular repair kit. 750mL

Capacity/Weight

• Capacity: 750 ml.
• Weight: 101 grams with bag
• Height: 8" (203.2mm)

Includes

• Cage Pod container
• Micro Fleece bag

Warranty

3 YEAR LIMITED WARRANTY
Because of our engineering and testing for this product we give it a 3 Year LIMITED Warranty to the original owner.

• Large area bottom hook supports large bottles
• Side cut-outs enable fast bottle withdraw and entry
• Extra sturdy high resistance techno polymer design
• Made in Italy with the finest Italian quality
• Pair with the hyper-reflective COOL SHOT insulated bottle

FEATURES

Grip

Approx 4lbs

Ideal Uses

• Road
• Triathlon (Aerobar and Frame)      

SPECIFICATION

Colour:

Black or Red

Weight:

Approx. 42g (1.5oz)

Grip:

Approx. 4lbs

Construction:

Nylon Composite

Includes:

• Corrosion resistant Black Zinc screws

Warranty:

Limited Two Year                                       

• All of the same features as the CARBON WING, easier on the budget, but slightly heavier
• Get a perfect position for you with 3 carrier positions and 4 cage angle positions.
• Tuck your repair out of the wind, in the integrated storage compartment for free speed!
• Mount 2 bottles on the side or 1 at the rear for flexibility. No need to purchase multiple carriers
• Sturdy aerospace aluminium material makes the Super Wing the toughest carrier on the market!

FEATURES

• SAVE up to 13 secs/40km
• MOST VERSATILE alloy system
• 3 MOUNTING POSITIONS . Self Draining
• 4 BOTTLE CAGE angles
• PATENTED INSIDE storage/Mini bag area
• COMPLETE WITH STRAP for tubular/bag beneath
• CARBON RAIL kit Available

Introduction

Our Hydration and Repair carriers have often been copied, but like any copy, it is never as good as the original. With over a decade of experience designing these carriers and winning more Ironman Distance World Championships than all our competitors combined, we have launched the first of the next generation of Alloy XLAB Hydration Carriers. This new 'wing' will be on winning race rockets for the next several years.

Rear carriers should not interfere with the air on the rider's back, but instead fill in the turbulence 'hole' behind the riders posterior, thereby reducing the rider's drag (which accounts for 64% of energy used on a racing bicycle). We positioned the carrier in the Wind Tunnel to 'draft' behind the rider causing no extra drag.

Storage

We wanted the next generation of carriers to solve the problem of storing keys, cell phones, cash, tire levers, and other essential items. These and other items can be stored in the MINI BAG which drops vertically and easily into the integrated compartment and is secured by the top XSW STRAP.

Tires and tubes are always an issue, so now you can attach them neatly under the Super Wing inside the XLAB MEZZO BAG.

Hydration

With the SUPER WING you can use a single AQUA-SHOT bottle cage on the rear or one on each side. XLAB recommends using either the GORILLA CAGE or the GORILLA XT CAGE for rear carriers.

Adjustable Mounting

One of the key features invented by XLAB is the multiple mounting holes for the saddle rail clamps. One position sets the bottle cages close to vertical and others incline the cages for rider preference. Because of it's past success, we have kept the same feature in the XLAB SUPER WING for customizing the installation.

In addition, there are four sets of holes for the lower cage bolts which with the front holes provides a total of 12 different cage angle positions.

Lightweight

We use the latest aerospace aluminium alloy to provide the toughest alloy carrier on the market with no twisting like other hydration carriers. Without hardware the XLAB SUPER WING weighs only 85 grams.

Bottom Line

The bottom line—simply the most versatile Alloy Hydration and Repair system carrier, complete with mounting hardware. XLAB makes you faster – ask the Pros!

SPECIFICATION

Includes

• SUPER WING Alloy Carrier
• All Hardware
• XSW Top and Lower Straps

Material

Aircraft Aluminium Alloy

Weight

Aluminium 93 grams, Hardware 53 grams. Total 146 grams

Warranty

3 YEARS WARRANTY
Because of our engineering and testing for this product we give it a 3 Years LIMITED Warranty to the original owner.

• Most adjustable single bottle system with both cage height & angle adjustments.
• Sturdy, reliable storage system with stiff stainless steel arms.
• DELTA 425 comes equipped with our world championship winning GORILLA CAGE with 10 lb of grip and 4 colour options!
• Need even more grip? The DELTA 425 XT comes with our GORILLA XT cage boasting 14 lb of tenacious grip and 2 colour options!
• Compatible with ISM Adamo saddles with transition hook, Adamo Attack & select PN models.
• Carry your repair with the optional XLAB MULTI-STRIKE REPAIR HOLDER XLAB AERO POUCH 300.

FEATURES

Compatibility

DELTA 425 is ISM saddle compatible with the following models: models with transition hooks, Adamo Attack™ and select PN series models.

Features and Benefits

• AERODYNAMIC LOCATION. Mounts to saddle, hiding in body’s draft.
• HIGHLY ADJUSTABLE. Can adjust cage angle and cage height for a perfect custom position.
• STABLE DESIGN. Stiffest mount on market with stainless steel arms.
• FLARED CAGE DESIGN. Makes inserting bottle easy.
• HIGHEST GRIPPING CAGE. Your choice of 10 or 14 lb of grip (approx.) on bottle to prevent bottle launches.
• ANTI-VIBRATION. Locking hardware for safety and security.
• REPAIR STORAGE OPTIONS. Compatible with AERO POUCH 300 bag or MULTI-STRIKE REPAIR HOLDER.

Looking for additional rear storage? XLAB offers two options that are designed to complement our DELTA 425 and DELTA 425 XT carriers. The AERO POUCH 300 storage bag and the MULTI-STRIKE REPAIR HOLDER. When using these accessories please follow the recommendations below.

• Due to the extra weight demands that these systems place on the DELTA 425 and 425 XT, we only recommend installing one of these storage options at a time.
• Additionally, installing the AERO POUCH 300 onto the DELTA 425 XT will add an additional 2-3 lb of bottle retention, making it extremely difficult to remove the bottle. We don't recommend using the AERO POUCH 300 with the GORILLA XT Cage.

SPECIFICATION

Compatibility

DELTA 425 is ISM saddle compatible with the following models: models with transition hooks, Adamo Attack™ and PN1.1 models.

Colour

Black

Material

Aircraft aluminium mount. Carbon fibre bottle cage

Includes

• DELTA 425 stainless Steel Chassis.
• Standard model: GORILLA carbon fiber cage with 10 lb of grip force.
• XT model: GORILLA XT carbon fiber cage with 14 lb of grip force.

Weight

165 grams

Warranty

DELTA 425 mount has a 3 Year limited warranty and the GORILLA Cage has a lifetime limited warranty.

Perfect weight-saving combo. Tire lever pair with hidden socket set. Total of 6, ¼" bits with max torque of 4.0 Nm. Textured side surface helps grip for quick repair. Fiber composite levers, toughened steel ratchet head. DD green band keeps items in place.

Top 19 fundamental tools all in a compact, lightweight set. Includes neoprene tool cover for added protection. Nickel plated tools with laser-etched labels. Anodized aluminum sides for premier quality. 116 grams

Ideal cage where you need the grip, but don't have the space for KAPTIVE 10/14 cages. Semi-side pull access with a super 8 lbs grip force.

Polar computer compatible insert fits Versa 200/early 500 systems, Kompact 125/500 systems.

Replacement Stepped CO2 holder or add to current holder to carry up to 4 CO2 cartidges. Includes (1) side.

Strap set designed for Super Wing. Includes top strap to hold Mini Bag, bottom strap to hold larger bags or tires, and hardware.

Strap set designed for Carbon Wing. Includes top strap to hold Mini Bag & bottom strap to hold larger bags or tires.

Complete hardware set to mount one (1) side of a Carbon Wing. Includes (1) Rail Clip, (2) Mounting Bolts, (2) Lock Washers, (2) Flat Washers

CO2 inflator & mini pump all in one handy tool. Pumps up to 90 PSI. Only 63 grams

Now you can control the rate of CO₂ inflation for the lightest weight possible. The new SPEED CHUCK weighs in at only
23 grams! It's designed for super fast inflation while allowing you to stop and continue inflation if needed. An absolute must have for training and competition.

• Push to inflate
• Fast under 1 second inflation
• Uses threaded cartridges
• Presta and Schrader Valves

Material

Anodized Aluminum

Weight

23 grams

Warranty

3 YEAR WARRANTY
Because of our engineering and testing for this product we give it a 3 Year LIMITED Warranty to the original owner.

Tidy repair storage holder. Fits between cage & Delta carrier mount. Mount 2 CO2s & inflator on one side & a tube on the other.

• Perfect size repair bag to hold your tire & inflation accessories.
• Small items won't get lost with an extra zip pocket.
• Tough nylon material ensures your repair kit stays safe.
• Long straps wrap around wide aero seat posts.
• Use the bag by itself or attach on a dual carrier

FEATURES

Have you been using electrical tape for holding your spare tire or tubes? Problem solved. This tough bag can store a 700c x 22mm tubular, or a couple of tubes, and fits under the XLAB CARBON WING, SUPER WING, or SONIC WING. Has long Velcro straps.

• Attaches with X-STRAPS to rear of CARBON SONIC, SONIC WING, TURBO WING, and MINI WING SYSTEM
• Long Front Strap fits around Aero seat posts
• Extra zip pocket

Typical Contents

• 1 Tubular Tire or 2 Tubes & Patch Kit
• 2 Tire Levers
• TRI TOOL KIT
• 3 AIR STRIKE CO₂ Cartridges
• 1 NANOFLATOR

Small Compartment:

• 3 AIR STRIKE CO₂ Cartridges

SPECIFICATION

Dimensions

6.3" L x 3.75" D x 2" - 3" W
16 cm L x 9.5 cm D x 5-8 cm W

Volume

0.87 litre (53 in³)

Material

Tough woven nylon. Black or Red

Weight

78g

Warranty

1 YEAR LIMITED WARRANTY
Because of our engineering and testing for this product we give it a 1 YEAR LIMITED Warranty to the original owner.

• IRONMAN WORLD CHAMPIONSHIP winning bag by Pete Jacobs!
• Quick access to nutrition with a super-slide zipper
• Keep tablets or pills separate with the handy inside pocket
• Avoid an overheated smartphone on those hot sunny days - bag interior is insulated!
• Rubberized bottom keeps the bag in its place
• Holds a whopping 2 bars and 4 gels
• Fits phones up to 6" (152.4mm) on the diagonal. Looking to carry a larger phone? Check out the extra capacity ROCKET POCKET XL PLUS

FEATURES

More Aerodynamic

• Actually reduces drag caused by stem and headset spacers.
• Same width as head tube (Standard size bag), therefore no increase in frontal area.
• 72 degree front fits tight up against stem.
• Tapered aero design profile.
• Super smooth low skin friction exterior reduces drag.

Non Sway Design

• Non slip surfaces underneath and on front of bag grip top tube and back of stem.
• Extra long front straps allow bag to be attached to bikes with cables entering the top tube behind the headset.

Easier to Use

• Located within easy reach while riding.
• Non slip rubber zipper pull.
• One handed Super-Slide zipper

Smart Storage

• Can be mounted behind stem or seat post.
• Silver coloured interior makes it easier to see contents.
• Stretch mesh pocket in contrasting red colour for cell phone (6" or 152.4mm measured diagonally), salt tablets, cash or other small items. Looking to carry a larger phone? Check out the extra capacity ROCKET POCKET XL PLUS
• Can store the longest energy bars.

Contents Stay Cooler

• Insulated sides keep your nutrition cooler.
• Silver interior helps reflect heat away

SPECIFICATION

Dimensions

7”(18cm)L x 3.9”(10cm) x 2”(5.1cm)W

Material

Proprietary low skin friction woven material. Red stretch interior mesh. Reflective silver lining. Proprietary insulation material. Anti-slip base. High stitch count embroidery.

Volume

0.6 litre (36 in³)

Weight

59 grams

Warranty

Because of our engineering and testing for this product, we give it a 3 Year LIMITED Warranty to the original owner.

Element-deflecting carbon finish. Front strap & inside pocket. 6.4 cm high, 0.33 Litre capacity

• Ideal starter bag for bikes with standard stems
• Non-slip rubber bottom ensures your bag stays put!
• Super Slide zipper allows for quick easy access
• Can hold up to 1 bar & 3 gels.
• Aerodynamic profile eliminates stem drag

FEATURES

More Aerodynamic

• Actually reduces drag caused by stem and headset spacers.
• Same width as head tube (Standard size bag), therefore no increase in frontal area.
• 72 degree front fits tight up against stem.
• Tapered aero design profile.
• Super smooth low skin friction exterior reduces drag.

Non Sway Design

• Non slip surfaces underneath and on front of bag grip top tube and back of stem.
• Extra long front straps allow bag to be attached to bikes with cables entering the top tube behind the headset.

Easier to Use

• Located within easy reach while riding.
• Non slip rubber zipper pull.
• One handed Super-Slide zipper

Smart Storage

• Can be mounted behind stem or seat post.
• Silver coloured interior makes it easier to see contents.
• Stretch mesh pocket in contrasting red colour for electrolyte tablets, salt tablets, cash or other small items.
• Can store the longest energy bars.

Contents Stay Cooler

• Insulated sides keep your nutrition cooler.
• Silver interior helps reflect heat away

SPECIFICATION

Dimensions

8.4” (21.3cm) L x 2.5” (6.4cm) H x 1.5” (3.8cm) W

Material

Proprietary low skin friction woven material. Red stretch interior mesh. Reflective silver lining. Proprietary insulation material. Anti-slip base. High stitch count embroidery.

Volume

0.3 litre (20 in³)

Weight

51g.

Warranty

Because of our engineering and testing for this product, we give it a 3 Year LIMITED Warranty to the original owner.

Mount the Hydroblade Bottle on MTB, fitness, drop or flat bars. Fits any bike with a 31.8mm diameter handlebar. Secure 4-bolt installation.

• EW unidirectional high-modulus carbon mounting plate
• Includes NEW high-grip carbon RAPTOR CAGE, colour-customizable to suit your setup
• Just add your choice of beverage: Includes hyper-reflective COOL SHOT bottle to keep liquids super cool
• SecureClip™ Brackets Install in an Instant: No ugly cable-ties, rubber bands or electrical tape needed to secure system: SecureClip™ brackets simply clip on and Velcro down to aerobars
• On top Garmin^® computer mount gives quick-glance bird’s-eye-view of your cycling data
• Also available in alloy: TORPEDO KOMPACT 125

FEATURES

All Inclusive System

• Comes with everything you need – mounting plate, GARMIN^®-specific computer mount, cage and bottle

No-Fuss Installation

• TORPEDO KOMPACT 500 comes fully assembled
• No Zip-ties, rubber bands or need to concoct your own mounting solution required – simply click-on and Velcro-down
• XLAB SecureClip™ brackets eliminate rattling and shifting. Fits 22.2 mm diameter aerobar extensions. If your bars are oversized we can custom make special oversized clamps. Contact sales@xlab-usa.com
• Megadjust™ means the widest adjustment range available, fitting aerobars 70 mm-150 mm (centre-to-centre) apart

Data Right Where You Need It

• Designed for easy placement of GARMIN^® bike computers, GARMIN^® Forerunner and fenix watches w/ Simple Quarter Turn interface (check Compatibility tab for specifics)

Rear Offset Design

• While bulkier systems limit hand placement and force your hands into limited pockets – the short, compact design (just 145 mm / 5.7 in) clears the aerobars for more, comfortable hand positions
• Perfect for shorter aerobars – rear offset design moves bottle weight over stem and doesn’t require a significant amount of space from your aerobars
• Improves bike handling compared to systems that load weight onto aerobars.

• Exclusive 500 Series Features

  High-Modulus, Unidirectional Carbon Fibre Mounting Plate

  Kit-Match with a Colour Customizable Cage

  • Colour match your bike kit with your choice of three optional interchangeable RAPTOR TALONS. Available in White, Orange and Black

  Insulated Bottle

  • Hyper-reflective COOL SHOT insulated bottle keeps liquids super cool

  Highest Bottle Grip of Kompact Series

  • 6 lbs grip force is durable for rough road conditions: Carbon anti-launch design increases grip force

SPECIFICATION

Compatibility:

Wahoo^®

Capacity:

Includes 20 oz (600 ml) XLAB COOL SHOT insulated bottle

Colours:

Assembled with black RAPTOR TALONS. Upgrade to White or Orange purchased separately.

Adjustment Range:

70 mm-150 mm (centre-to-centre)

Weight:

154.4 g (without bottle or computer)

Length:

145 mm

Bottle Grip Force:

7 lbs

Construction

Bottle: Lead free, BPA-Free and HDPE food safe certified bottle
Mounting Plate: Carbon
Cage: Carbon chassis, polycarbonate RAPTOR TALON cage ends
Brackets: Nylon Composite with Velcro Straps coated with no-slip extension grip. Fits 22.2 mm diameter aerobar extensions. If your bars are oversized we can custom make special oversized clamps. Contact sales@xlab-usa.com

Warranty:

2 Year Limited Warranty

Lightweight cycling vest for tempo rides and training

The TEMPO! TWO Jersey is the cycling jersey designed for performance and comfort in warmer conditions. Perfect for competitive rides, challenging climbs, or spirited summer rides—this jersey offers optimal ventilation with its cooling mesh front panel, while the UPF 50+ sun-protective back panel actively cools your body when the heat is on. With its aerodynamic yet comfortable race-fit, silicone gripper, three practical rear pockets, and a full-length YKK zipper, you’ll experience the ideal balance of performance and comfort for every ride.

Details and Materials 

• Aerodynamic race-fit
• Cooling mesh front panel
• UPF 50+ sun protection on the back panel
• Elastic silicone gripper for perfect fit
• Three practical rear pockets
• Full-length YKK zipper
• Fusion Powerlock: Secure seam construction
• STANDARD 100 by OEKO-TEX® certified (Cert.: 2017OK1267 AITEX)
• Fabrics produced in Italy
• Manufactured at FUSION’s own factory in Lithuania
• Materials:
• Front: 86% polyester, 14% elastane (mesh)
• Back and sleeves: 86% polyester, 14% elastane
• Mesh on sleeves: 94% polyester, 6% elastane

Womens S3 Long Bib Tights are developed to keep you warm and protected during winter’s most demanding training sessions. With an advanced 3-layer membrane front panel, these tights effectively shield against wind and light rain, while the high breathability ensures excess heat and moisture are efficiently managed.

The soft fleece lining provides insulating warmth, making these tights ideal for temperatures ranging from -5°C to 10°C. Thanks to the highly elastic material, you get a snug and comfortable fit that moves with your body, no matter your riding style or shape.

Designed without a built-in chamois, the tights allow you to pair them with your favorite short bibs for maximum comfort. Customers praise their ability to keep out the cold and water, as well as their durable quality, making them an essential choice for winter riders.

For added functionality, subtle 3M reflective details on the lower legs enhance visibility in low light, while elastic foot straps ensure the tights stay securely in place throughout your ride.

Details and Materials 

• Wind- and water-resistant 3-layer fabric on the front
• Insulating fleece lining for warmth and comfort
• Highly elastic fit for freedom of movement
• No built-in chamois – pair with short bibs
• Subtle 3M reflective details on lower legs
• Elastic foot straps keep tights in place
• Fabric produced in Italy
• Made at FUSION`s own factory in the EU, Stocked in the UK
• STANDARD 100 by OEKO-TEX® certified product; this means that all components such as fabrics, threads, transfers, zippers, elastic bands, labels, etc., have been tested and approved according to the standard. FUSION certificate number: 2017OK1267 AITEX

Material: Front outer layer: 73% nylon, 27% elastane Front membrane: 100% polyurethane Front inner layer: 100% polyester Backside: 85% polyamide, 15% elastane